IPC-4761 is useful as a design guide; however, it does not address
specifications.
The D-33a task group is currently working on an update to IPC-6012 that will
address cap plating requirements.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Scott Westheimer
Sent: Monday, August 18, 2008 10:46 AM
To: [log in to unmask]
Subject: [TN] Via hole fill
Can someone be so kind as to direct me to the IPC specification that covers
filled via's. I am looking for the min average copper plating thickness
required. These are non-conductive filled via's.
Thanks in advance.Scott B. Westheimer5709 Clarks Fork DriveRaleigh, NC
[log in to unmask]: (919)713-0748Cell NC: (919)961-5364
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------