Thank you all, so far I am able to get much lesser void in QFN as
compared to LGA. LGA is headache as once a while one of the pads/joints
will has a void of about (less/more) 30%. Thank again.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of John Burke
Sent: Friday, 29 August 2008 9:37 PM
To: [log in to unmask]
Subject: Re: [TN] LGA/QFN voids %
I agree Rex,
For QFN parts the issue is generally thermal and /or signal to ground
noise
related rather that "mechanical" or "current capacity" related.
They are indeed interesting devices for low I/O applications. I have
been
using them in designs for around 5 or 6 years now with no issues
although a
high res X-ray always comes in handy.....8-)
John
John Burke
(408) 515 4992
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Rex Waygood
Sent: Friday, August 29, 2008 1:33 AM
To: [log in to unmask]
Subject: Re: [TN] LGA/QFN voids %
I have just had to deal with a video chip which gets exceedingly hot
where the part is qualified down to 50% coverage/void of the thermal
pad.
If a standard comes about then the standard having a tighter requirement
than the part is qualified for by the manufacturer doesn't make much
sense to me.
Regards
Rex
:-)
Rex Waygood
Technical Manager
PartnerTech Poole Ltd
Benson Road
Poole
Dorset BH17 0RY
United Kingdom
Tel: +44 (0)1202 674333
Fax: +44 (0)1202 678028
DDI: +44 (0)1202 338222
Mob: +44 (0)7887 997403
[log in to unmask]
www.PartnerTech.co.uk
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Bernard, David
Sent: 29 August 2008 09:08
To: [log in to unmask]
Subject: Re: [TN] LGA/QFN voids %
There are no standards/guidelines at this time, although the IPC has
recently convened a task group to put one together along the lines of
the IPC7095 for BGAs.
Bob Willis and I have advocated a maximum of 20% voiding (whether by a
single void or multiple voids) in either the central or edge
terminations when viewed by x-ray inspection. However, some people may
define a higher total percentage voiding as acceptable (say 30%,
especially within the central termination) but with the extra proviso
that no single void should exceed perhaps 5 or 10%. This appears to be
more of concern for devices that require the ability to dissipate a
larger quantity of heat and the presence of any large voids may affect
this efficiency.
At the end of the day, however, without the any formal limit defined in
IPC610D, or other documents, then I would suggest that you should
negotiate an acceptable limit between yourself and your customer.
David
Dr. David Bernard
Product Manager X-ray Systems
Dage Precision Industries
Rabans Lane
Aylesbury
Buckinghamshire
HP19 8RG
United Kingdom
Tel: +44 1296 317800
Mob:+44 7796 993391
E-mail: [log in to unmask]
www.dage-group.com
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Tan Geok Ang
Sent: 29 August 2008 02:32
Subject: LGA/QFN voids %
Hi All,
Need you expertise in advising the maxi. allowable void %
in
LGA and QFN. Does any standard state this requirement?
Thank and have a nice day!
Regards
GA Tan
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
------------------------------------------------------------------------
----
---
The information contained within this e-mail and any attachments
contained
therein may be confidential and/or legally privileged and is for the use
of
the intended recipient only. If you are not the intended recipient
please
delete it from your system and notify the sender by return e-mail. The
content of this e-mail may not be copied or disclosed to any third
parties
without prior permission from the sender.
E-mail is susceptible to data corruption, interception, tampering and
viruses. We do not accept any liability for any such incidents or any
consequences thereof.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or
847-615-7100 ext.2815
-----------------------------------------------------
__________ NOD32 3397 (20080828) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
