I would not recommend HASL, choose one of the flat alternative finishes.
Remember type 3 paste is about 50% solder by volume. A 100 um of variation
in the HASL is more than the total applied volume of solder in the paste
deposit. This type package will not work well with 100% variation in solder
volume in the solder connection.
You might be successful with 25 um of variation in the HASL finish.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of James Verrette
Sent: Tuesday, August 19, 2008 1:22 PM
To: [log in to unmask]
Subject: [TN] Maximum HASL thickness for SMT of QFN
What is the maximum SnPb HASL thickness/uniformity that can be tolerated in
the SMT assembly of a .5mm pitch QFN package? Is there anyone else out
there putting .5mm pitch parts on HASL finished boards that is willing to
share their experiences?
Jim Verrette
Senior Electrical Engineer
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in the
BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet
NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send
e-mail to [log in to unmask]: SET Technet Digest Search the archives of
previous posts at: http://listserv.ipc.org/archives Please visit IPC web
site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------