Subject: | |
From: | |
Reply To: | |
Date: | Tue, 19 Aug 2008 08:06:13 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
IPC-4761 is dedicated to vias
http://portal.ipc.org/Purchase/CatalogSearchResults.aspx?Option=1&Produc
tTypeText=All&ProductTypeValue=All&Title=&Author=&ProductDesc=4761&Custo
m1=&Custom2=&Custom3=&Custom4=All&Demographics=pa_wpromote%24%7c
Jeffrey A McGlaughlin, CID
Engineering Designer
Battelle
505 King Ave
Columbus Ohio 43201-2693
Phone (614)424-7582
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Smith, Rick
Sent: Tuesday, August 19, 2008 7:47 AM
To: [log in to unmask]
Subject: Re: [TN] Via hole fill
I think you can find this in IPC-2226
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Scott Westheimer
Sent: Monday, August 18, 2008 1:46 PM
To: [log in to unmask]
Subject: [TN] Via hole fill
Can someone be so kind as to direct me to the IPC specification that
covers filled via's. I am looking for the min average copper plating
thickness required. These are non-conductive filled via's.
Thanks in advance.Scott B. Westheimer5709 Clarks Fork DriveRaleigh, NC
[log in to unmask]: (919)713-0748Cell NC: (919)961-5364
_________________________________________________________________
Get ideas on sharing photos from people like you. Find new ways to
share.
http://www.windowslive.com/explore/photogallery/posts?ocid=TXT_TAGLM_WL_
Photo_Gallery_082008
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|