TECHNET Archives

August 2008

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Mime-Version:
1.0
Sender:
X-To:
Date:
Tue, 26 Aug 2008 09:06:19 -0500
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, Mark Larson <[log in to unmask]>
Subject:
Content-Transfer-Encoding:
quoted-printable
Content-Type:
text/plain; charset="ISO-8859-1"
From:
Mark Larson <[log in to unmask]>
Parts/Attachments:
text/plain (26 lines)
Hi, 

been lurking for a few months after not having posted for a couple years. I
am wondering if anyone can give a rule of thumb for designing land patterns
for an LGA, specifically for a 5mm square x 1.2mm high with rectangular
metalization pads ( MEMSic MMC302xM to be exact) 

Shouldn't this be treated like any BGA, the pad size on the pcb the same
size as the metalization on the bottom of the part? LGA do not have "solder
balls" like a BGA, so the rule of thumb making the pad 80% of ball size does
not apply, and besides this part has .65mm x .35mm rectangular contact, not
round.

thanks in advance
Mark

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2