The spaces ARE supposed to be there. It works for me!
Brian
Igoshev, Vladimir wrote:
> And that is exactly what I did. There are two spaces in the link
> (between the words cracking chip capacitors) which are not supposed to
> be there.
>
> www.bobwillis.co.uk/guide/cracking chip capacitors.pdf
>
>
> Regards,
>
> Vladimir
> -----Original Message-----
> From: Rex Waygood [mailto:[log in to unmask]]
> Sent: Tuesday, July 15, 2008 9:16 AM
> To: TechNet E-Mail Forum; Igoshev, Vladimir
> Subject: RE: [TN] Ceramic caps
>
> Yes it does, but you need to cut and paste all of it into your browser
>
>
>
>
> [log in to unmask]
> www.PartnerTech.co.uk
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Igoshev, Vladimir
> Sent: 15 July 2008 14:06
> To: [log in to unmask]
> Subject: Re: [TN] Ceramic caps
>
> Hi Bob,
>
> The link doesn't work.
>
> Regards,
>
> Vladimir
> -----Original Message-----
> From: Bob Willis [mailto:[log in to unmask]]
> Sent: Tuesday, July 15, 2008 2:25 AM
> To: 'TechNet E-Mail Forum'; Igoshev, Vladimir
> Subject: RE: [TN] Ceramic caps
>
> The following text outlines many of the common and less common reasons
> for cracking capacitors. The problem is less common today but has always
> been a issue in industry.
>
> www.bobwillis.co.uk/guide/cracking chip capacitors.pdf
>
> Many thanks
>
> Bob Willis
> 2 Fourth Ave, Chelmsford, Essex, CM1 4HA England
> Tel: (44) 1245 351502
> Fax: (44) 1245 496123
> Mobile: 07860 775858
>
> www.ASKbobwillis.com
>
> New Bob Willis "Printed Board Inspection & Quality Control Workshop" 3rd
> September www.ASKbobwillis.com/PCBworkshop.pdf
>
> Book your place on Bob's "Step by Step Failure Analysis Workshop" 11th
> September www.ASKbobwillis.com/faworkshops.pdf
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Igoshev, Vladimir
> Sent: 14 July 2008 14:08
> To: [log in to unmask]
> Subject: [TN] Ceramic caps
>
> Hi TechNeters,
>
> I came across an unusual (at least to me) failure mode of ceramic caps.
> They crack along the component body in either normal (from top all the
> way through to the bottom), or parallel (from one side all the way
> through to the other side) direction to the board the caps are mounted
> on.
>
> Has anyone seen something similar?
>
> Thanks a lot in advance.
>
> Regards,
>
> Vladimir
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
> unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
> (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing
> per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
> http://listserv.ipc.org/archives
> Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> for additional information, or contact Keach Sasamori at [log in to unmask]
> or 847-615-7100 ext.2815
> -----------------------------------------------------
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
> unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
> (re-start) delivery of Technet send e-mail to [log in to unmask]: SET
> Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
> posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
> archives of previous posts at: http://listserv.ipc.org/archives Please
> visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
> additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-615-7100 ext.2815
> -----------------------------------------------------
>
> ------------------------------------------------------------------------
> -------
>
> The information contained within this e-mail and any attachments
> contained therein may be confidential and/or legally privileged and is
> for the use of the intended recipient only. If you are not the intended
> recipient please delete it from your system and notify the sender by
> return e-mail. The content of this e-mail may not be copied or disclosed
> to any third parties without prior permission from the sender.
>
>
>
> E-mail is susceptible to data corruption, interception, tampering and
> viruses. We do not accept any liability for any such incidents or any
> consequences thereof.
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
