TECHNET Archives

July 2008

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
John Maxwell <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, John Maxwell <[log in to unmask]>
Date:
Tue, 22 Jul 2008 13:29:22 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (81 lines)
Ioan,
Unfortunately long term reliability will not be one of the wishes granted.

John

> That's the genie in the cap. When it bulges, you are granted 3 wishes.
>
> -----Message d'origine-----
> De : TechNet [mailto:[log in to unmask]] De la part de Stadem, Richard D.
> Envoyé : July 22, 2008 1:54 PM
> À : [log in to unmask]
> Objet : Re: [TN] RE: Bulging Cap
>
> Yes. This is how the problem manifest itself, with a bulge on the top of
> the cap. However, we did not have the contamination shown just to the
> left of the coil!  :-) 
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
> Sent: Tuesday, July 22, 2008 12:17 PM
> To: [log in to unmask]
> Subject: [TN] RE: Bulging Cap
>
> Hi Ioan!
>  
> I'm doing fine. Staying busy trying to get back into the swing of things
> at work after being gone for three-weeks. We're also getting our
> Select-X installed on our new wave machine today, so I'm sure I'll be
> tied-up this afternoon learning how to use it.
>  
> Anyways, I have your picture posted. It's here:
>  
> http://stevezeva.homestead.com/files/Bulging_Electrolytics.jpg
>  
> Steve
>
> ________________________________
>
> From: Ioan Tempea [mailto:[log in to unmask]]
> Sent: Tuesday, July 22, 2008 10:50 AM
> To: Steve Gregory
> Subject: Bulging Cap
>
>
>
> Hi Steve,
>
>  
>
> How are you? I hope everything is well!
>
>  
>
> I have asked a question on Technet about the Panasonic caps and I think
> it would be a good idea to refer to the attached picture that shows the
> bulging at the top of the parts. I wonder if this is acceptable or not.
>
>  
>
> Could you please post the image on your site?
>
>  
>
> Thanks,
>
>  
>
> Ioan
>
>   

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2