Subject: | |
From: | |
Reply To: | |
Date: | Tue, 22 Jul 2008 10:26:23 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Good morning Phil.
I don't think you're going to find one. Unless the Konform is a harder
more durable acrylic coating than the Humiseal 1B31 we use, I think you
will find the material to be embedded in the coating and washing will not
bring it out. The fact that you can't blow it off indicates that. We
have always had to globally strip the acrylic coating to get the "schmutz"
off, then recoat the board.
If I had to try, it would be with a very mild detergent solution such a
Liquinox.
Doug Pauls
Phil Nutting <[log in to unmask]>
Sent by: TechNet <[log in to unmask]>
07/22/2008 10:18 AM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to
Phil Nutting <[log in to unmask]>
To
[log in to unmask]
cc
Subject
[TN] Washing dirty conformally coated boards
Good morning,
We have some circuit boards that we coat with Chemtronics Konform AR, that
when returned from the field need to be washed to remove the
graphite/carbon and brass dust (it won't blow off). Washing and rinsing
at temperature tends to peel the conformal coating off. The currently
process is hand washing and rinsing, but it is a totally uncontrolled
process.
I'm looking for recommendations for a more controlled process that is less
likely to remove the coating. I just want to get the dusty stuff off the
board. It looks I'm going to have to create a machine or controlled
process the works at room temperature.
Phil
Note: All the information contained in this e-mail and its attachments is
proprietary to Kaiser Systems, Inc. and it may not be reproduced without
the prior written permission of sender. If you have received this email
in error, please immediately return it to sender and delete the copy you
received.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|