Hi Kenny!

Picture is up! Go to:

 http://stevezeva.homestead.com/files/Bubbles.jpg

Steve

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Ken Bloomquist
Sent: Monday, June 02, 2008 11:58 AM
To: [log in to unmask]
Subject: Re: [TN] Tiny Bubbles

Woops, I forgot to mention that we spray coat these boards. The bubbles
are most prevalent along thick edges but pretty much everywhere. I'll
see if I can get Steve to post a picture.

Thanks,

KennyB

-----Original Message-----
From: Kathy Kuhlow [mailto:[log in to unmask]]
Sent: Monday, June 02, 2008 9:53 AM
To: 'TechNet E-Mail Forum'; Ken Bloomquist
Subject: RE: [TN] Tiny Bubbles

Are the air bubbles along component edges or open areas? It might be
that you are moving the board in/out of the material too fast.  I know
from a past project we needed to allow extra time during the dip prior
to removal for the air bubble to release on SOT package devices. 

Kat

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------