Subject: | |
From: | |
Reply To: | |
Date: | Fri, 23 May 2008 15:32:51 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Phil: Washing in DI water is a virtual "why bother" move. If you have any sort of organic on the surface, DI is not going to touch it.
I would try an experiment where you did some more serious cleaning, perhaps manually, for the experiment, and see if this helps.
Rudy Sedlak
RD Chemical Company
--- On Fri, 5/23/08, Phil Nutting <[log in to unmask]> wrote:
> From: Phil Nutting <[log in to unmask]>
> Subject: [TN] Conformal coating washing off
> To: [log in to unmask]
> Date: Friday, May 23, 2008, 1:32 PM
> We are using Chemtronics Konform AR on some circuit boards.
> The boards are batch washed in DI water and pre-baked prior
> to coating and then cured in a 60° or 77° C oven.
>
> In a recent test of a new washing system where we are
> removing slip ring dust (brass and carbon) on these boards
> and dielectric oil from other boards and aluminum castings,
> I noticed the conformal coating peeling off in sheets after
> both the wash and DI rinse cycles. Both wash and rinse are
> between 140 and 150° F.
>
> Is this stuff peeling off because of the water temperature,
> poor pre-coating prep or possibly something else?
>
> Thanks in advance,
>
> Phil
>
> Note: All the information contained in this e-mail and its
> attachments is proprietary to Kaiser Systems, Inc. and it
> may not be reproduced without the prior written permission
> of sender. If you have received this email in error,
> please immediately return it to sender and delete the copy
> you received.
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using
> LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with
> following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send
> e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send
> e-mail to [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
> http://listserv.ipc.org/archives
> Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
> additional information, or contact Keach Sasamori at
> [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|