Subject: | |
From: | |
Reply To: | |
Date: | Thu, 22 May 2008 08:05:28 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Richard,
Here's what I recommend to our customers and works very well, I have assembled thousands of boards with hundreds of 0402s each with practically no tombstoning. It is actually a collection of thoughts found on Technet over the years.
- 0.023"x0.023" pads, with a 0.014" gap
- The traces attached to the pads should be routed from the pad along the component axis for at least 7 mils, then routed as per designer's needs
- The traces attached to each pad have to have the same width
- The pads included in copper planes have to have thermal relief
- The stencil is cut square 0.021", no homeplating
Good luck,
Ioan
-----Message d'origine-----
De : TechNet [mailto:[log in to unmask]] De la part de Stadem, Richard D.
Envoyé : May 21, 2008 5:26 PM
À : [log in to unmask]
Objet : [TN] 0402 anti-tombstoning land pattern
I am trying to find an 0402 land pattern that is optimum from the
standpoint of fixing tombstoning issues in a leaded convection reflow
process. If anyone has a pattern that works feel free to send it to me
offline.
Thanks
Richard
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|