Technetters,
We currently don't have a copy of IPC-2221 or any of the other design standards. We are designing a power application PCB 120v < 10A through a trace that is .3" wide by 1.2 long (.150" from one PTH to another on both sides)with 2 oz copper on FR4/G10 .062". The board will be conformally coated after assembly with Dymax/UV cured CC that withstands 500V at 10 mils thickness.
Question: Are these traces wide and thick enough to dissipate the heat? En
Thanks in advance
Eva Jones
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------