Good morning ALL from Spain.
We are starting to use moisture sensitive components in our boards (class 3).
It is clear that these components shall be handled iaw J-STD-033, but we
have a concern: how to point out in the manufacturing documentation that
there are moisture sensitive components in the PWA. This information is
essential to the process engineering people to prepare the manufacturing
instruction sheets.
In a first approach, we have thought to introduce a warning note in the
drawing, but we are not sure if it is a standard practice.
If you can send your comments, I’ll appreciate it a lot.
Muchas gracias.
Juan T. Marugán
Indra Sistemas SA
Supply Chain Management (SCM)
Madrid (ESPAÑA)
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------