很简单，第一，你的供应商更改相关的制程生产出符合尼公司需求的产品如果不行，建议更换新的供应商

-----Original Message-----
From: TGAsia [mailto:[log in to unmask]] On Behalf Of Hermus Leung
Sent: Tuesday, April 22, 2008 1:10 AM
To: [log in to unmask]
Subject: Re: [TGA] 求助

你要測的應該是 solderability 吧, 中文大概是"可焊性"/"濕潤性"之類的字眼.
看了一下手上的610D, 應該是 " 5.2 Soldering Anomalies " 裡面有講的
(我只有 draft 版, 和正式版不知道有沒有改動)


不過我覺得過了爐的東西碰一下也不行,這肯定是藉口.
建議你換一個供應商,嘿嘿...

如果非要用他不可,你可以要求供應商提供測試方法.
這種在 IQC 試焊,不行就整批退吧..

Hermus Leung
Technical Service Engineer, 3M Hong Kong
Victoria Centre, 5/F., 15, Watson Road, Hong Kong
Fax : (852) 2969-5758
Tel : (852) 2806-6407
eMail : [log in to unmask]


                                                                           
             "QA Dept."                                                    
             <[log in to unmask]                                             
             M.CN>                                                      To 
             Sent by: TGAsia           [log in to unmask]                      
             <[log in to unmask]>                                           cc 
                                                                           
                                                                   Subject 
             04/21/2008 04:46          [TGA] 求助                          
             PM                                                            
                                                                           
                                                                           
             Please respond to                                             
               Asia Committe                                               
             Task Group Forum                                              
             <[log in to unmask]>;                                             
             Please respond to                                             
                "QA Dept."                                                 
             <[log in to unmask]                                             
                   M.CN>                                                   
                                                                           
                                                                           




各位：


以下是我司反饋給供應商的不良問題投訴，因為在我們過錫後發現有很多產品的同一
個元件出現假焊的不良問題，然後我們用手試著搖這個元件，發現這個元件100%的存
在輕搖2-3次後便出現假焊，但供方給出了下面的回復。供方說不能用手搖（但我們是
因為產品出了問題後再做這個動作的），不知有沒有IPC標准支持我呢？


==============================
賀雲        品質部
==============================
美迅工程實業有限公司