各位同仁：
仅代表IPC全体会员，欢迎和感谢各位加入IPC亚洲标准技术组。我们衷心感谢您的志愿加入，并希望您同时获得与同行有价值的交流，以增进您的知识。您的加入使我们能够获得中国用户对IPC标准的反馈意见，并使我们能更加快速为中国电子制造业提供更多翻译的中文标准，这将对促进亚洲电子制造业的发展有着重大的意义。
凡参加到各任务组的成员，须清楚地了解并同意以下事项：
未经IPC同意不向第三方提供IPC的技术文件和/或您翻译的IPC技术资料。当您向IPC提供任何工业实践经验和数据，您须确认是经过产权所有者授权您这样做。IPC对于因为您提供的未经授权的技术资料造成的任何知识产权纠纷将不承担责任。
并服从《注册者管理条例》：
1) 该论坛是为解决电子制造中遇到的问题而专设的电子邮件技术论坛，不涉及政治、社会、环境、道德及宗教等问题。
2) 该论坛已有400多位注册者，今后人数还会不断增加。任何邮件，无论其长短，都会发送至每位注册者。您认为诙谐或滑稽的内容，在很多注册者看来只不过是一封垃圾邮件而已。所以在您点击“发送”按钮之前，请仔细考虑您的邮件是否会令收件人获益，还是会令其疏远你。
3) 从建立至今，本论坛已编档保存了所有讨论的问题。在您提出问题时如果想到是否已经有过讨论，请先搜索一下看是否已有相关的信息或答复。
4) 附件不可以发在论坛上。如您需要发送图片，请先将其发送至internet，在邮件中给出其URL地址。
5) 不允许在论坛上附带或签注任何有商业意图的信息。违反者将被删除。
请您花点时间阅读了解上述内容，如果有任何疑问，欢迎您在TGAsia论坛上提出，我们会尽快给予回复。
再次欢迎您的加入！
David W. Bergman,
CAE, Vice President, Standards, Technology & International Relations
IPC, Inc.
Leesha Peng 彭丽霞
标准开发/设计课程与技术资源部总监
Director, Standards/Design Programs
IPC WOFE, Shanghai
-----邮件原件-----
发件人: Leo Yang
发送时间: 2008年4月16日 21:20
收件人: [log in to unmask]
抄送: Charlotte Hao
主题: 转发: You have been added to the TGAsia list
Dear all,
Please read this again. Thanks!
And Charlotte,
Could you please send the Chinese Version again to our entire valuable subscriber? Thanks!
Leo Yang
2008-4-16
You have been added to the TGAsia mailing list (Asia Committe Task Group
Forum)
Dear Colleagues,
On behalf of the IPC members, we would like to welcome and thank you for
joining the IPC Task Group in China. We appreciate your volunteer
participation and hope that you gain as much valuable education and
knowledge. Your participation is valuable to the Asian electronics
manufacturing industry as it will enable IPC to get feedback from Chinese
users of IPC standards as well as to provide more translated documents to
the Chinese electronics manufacturing in a quicker time.
Each individual signed on TGAsia shall know clearly and must agree to the
following issues: You will not give IPC’s technical documents and/or
translated sections that you have done to a third party without
permission from IPC. When you contribute any industry practice and
technical data you must be sure of that you have been authorized by its
owner to make this contribution. IPC cannot take responsibility for any
IP violation because of contributions provided without authorization.
Please take some time to read and be familiar with these policies. If you
have any questions, please feel free to ask by using the IPC TGAsia
Listserv; the questions will be answered promptly.
Once again, welcome aboard!
David W. Bergman, CAE,Vice President, Standards, Technology and
International Relations, IPC
Leesha Peng Director, Technology Standards, and Training Program IPC WOFE
Please save this message for future reference, especially if this is the
first time you are subscribing to an electronic mailing list. If you ever
need to leave the list, you will find the necessary instructions below.
Perhaps more importantly, saving a copy of this message (and of all
future subscription notices from other mailing lists) in a special mail
folder will give you instant access to the list of mailing lists that you
are subscribed to. This may prove very useful the next time you go on
vacation and need to leave the lists temporarily so as not to fill up
your mailbox while you are away! You should also save the "welcome
messages" from the list owners that you will occasionally receive after
subscribing to a new list.
To send a message to all the people currently subscribed to the list,
just send mail to [log in to unmask] This is called "sending mail to the
list," because you send mail to a single address and LISTSERV makes
copies for all the people who have subscribed. This address
([log in to unmask]) is also called the "list address." You must never try to
send any command to that address, as it would be distributed to all the
people who have subscribed. All commands must be sent to the "LISTSERV
address," [log in to unmask] Please remember this fact, and do
not mix up sending commands and sending mail to the list.
You may leave the list at any time by sending a "SIGNOFF TGAsia" command
to [log in to unmask] You can also tell LISTSERV how you want it
to confirm the receipt of messages you send to the list. If you do not
trust the system, send a "SET TGAsia REPRO" command and LISTSERV will
send you a copy of your own messages, so that you can see that the
message was distributed and did not get damaged on the way. After a while
you may find that this is getting annoying, especially if your mail
program does not tell you that the message is from you when it informs
you that new mail has arrived from TGAsia. If you send a "SET TGAsia ACK
NOREPRO" command, LISTSERV will mail you a short acknowledgement instead,
which will look different in your mailbox directory. With most mail
programs you will know immediately that this is an acknowledgement you
can read later. Finally, you can turn off acknowledgements completely
with "SET TGAsia NOACK NOREPRO".
Following instructions from the list owner, your subscription options
have been set to "SUBJECTHDR" rather than the usual LISTSERV defaults.
For more information about subscription options, send a "QUERY TGAsia"
command to [log in to unmask]
Contributions sent to this list are automatically archived. You can get a
list of the available archive files by sending an "INDEX TGAsia" command
to [log in to unmask] You can then order these files with a "GET
TGAsia LOGxxxx" command, or using LISTSERV's database search facilities.
Send an "INFO DATABASE" command for more information on the latter.
This list is available in digest form. If you wish to receive the
digested version of the postings, just issue a SET TGAsia DIGEST command.
More information on LISTSERV commands can be found in the LISTSERV
reference card, which you can retrieve by sending an "INFO REFCARD"
command to [log in to unmask]
|
