Subject: | |
From: | |
Reply To: | (Designers Council Forum) |
Date: | Tue, 1 Apr 2008 15:49:25 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I am currently working on a design that will use Hot Bar soldering to
fasten a flex circuit to one edge of my pcb.
My question, to anyone familiar with this technique, is how close can I
place adjacent surface mount components that will have already been
reflowed in place?
I've been told that the area directly under the area to be pulse heated
will have to remain free of components, to make sure of flatness in the
jig, but no information was given regarding where the keepout area ends.
Most articles on the web talk about the actual soldering and not design
parameters surrounding the area.
Thanks in advance,
Stephen Hankins
PCB Design
Xantech Corp.
Sylmar, CA.
818 362-0353 x255
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
|
|