Subject: | |
From: | |
Reply To: | |
Date: | Thu, 3 Apr 2008 16:38:42 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I would have thought that your first problem would be that the flex will
be flat when manufactured and will therefore wrinkle when bonded to the
curved surface unless the curvature is very slight. I'm assuming a
doubly curved surface, obviously you won't have that problem if the
curvature is along only one axis.
This sounds like the kind of thing that you could assemble using a "vac
bag" process in the same way as composite structures are made. The main
issue with vac bag as I understand it that of movement between the layer
that are being laminated together. I guess this could be avoided by
designing in self jigging features to the mating parts. You may wish to
consider sub contracting the job to a manufacturer of aerospace
composite components??
Sounds like an interesting challenge. Sorry I can't be of more help.
Regards,
Stadem, Richard D. wrote:
> Perhaps you can use a film adhesive such as Ablestik.
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Chandler
> Sent: Thursday, April 03, 2008 6:46 AM
> To: [log in to unmask]
> Subject: Re: [TN] Vacuum Assembly
>
> My apologies for not defining the issue clearly.
>
> The issue is, we are looking at laminating a flex circuit to a concave
> surface.
> The flex will have capacitive switches on it so voids between the flex
> and the concave surface will cause degraded performance of the switch.
> We need to avoid air bubbles between the flex and the mating surface.
>
> The opposite side of the concave surface is a TALC surface, so no
> scratches or blemishes can be tolerated.
>
> Thanks for the feedback already provided.
>
>
--
Eric Christison Msc
Mechanical Engineer
Consumer & Micro group
Imaging Division
STMicroelectronics (R&D) Ltd
33 Pinkhill
Edinburgh EH12 7BF
United Kingdom
Tel: +44 (0)131 336 6165
Fax: + 44 (0)131 336 6001
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|