TECHNET Archives

April 2008

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Brian Chandler <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Brian Chandler <[log in to unmask]>
Date:
Thu, 3 Apr 2008 06:45:58 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (22 lines)
My apologies for not defining the issue clearly. 

The issue is, we are looking at laminating a flex circuit to a concave surface. 
The flex will have capacitive switches on it so voids between the flex and the 
concave surface will cause degraded performance of the switch. We need to 
avoid air bubbles between the flex and the mating surface.

The opposite side of the concave surface is a TALC surface, so no scratches 
or blemishes can be tolerated.

Thanks for the feedback already provided.

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2