TECHNET Archives

April 2008

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
Date:
Mon, 28 Apr 2008 14:11:03 EDT
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Subject:
MIME-Version:
1.0
Content-Transfer-Encoding:
quoted-printable
Content-Type:
text/plain; charset="UTF-8"
From:
Werner Engelmaier /* <[log in to unmask]>
Parts/Attachments:
text/plain (37 lines)
Hi David,
you are asking the wrong questions.
Q 1: The higher yield strength [both in shear and tension] of SAC solders 
causes higher stresses at the interfaces, everything else being equal, and thus 
produce more interfacial brittle failures.

Q 2: Higher cooling rates cause increased stresses at the interfaces, 
everything else being equal, and thus produce more interfacial brittle failures or 
pad cracking.

Of course, everthing else is NOT equal. Since SAC has a Solidus of 217C—34C 
higher than SnPb, the thermal expansion strains and stresses are that much 
higher. Sac also has a modulus of elasticity about 40% higher than SnPb—the 
stiffer solder will also result in higher stresses at the interfaces and thus 
produce more interfacial brittle failures or pad cracking.


Werner



**************
Need a new ride? Check out the largest site for U.S. used car 
listings at AOL Autos.
      
(http://autos.aol.com/used?NCID=aolcmp00300000002851)

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2