Hi All,

I have a board I want to ensure the blind vias are filled with resin,
planarized then plated over with copper.  My shops are pretty good at
giving me what I want; even if I don't ask for it :)  But I would like
to ask for it right!  Can anyone give suggestions on how to word the fab
note?

(I still remember Steve's photo of SMT pads that had bumps on them
because the shop didn't properly planarize the resin in the filled vias
before final plating, and I want to avoid that...)

Thanks,
Ryan

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------