TECHNET Archives

March 2008

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Lenny ERG <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Lenny ERG <[log in to unmask]>
Date:
Tue, 4 Mar 2008 16:15:22 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (104 lines)
my thoughts exactly.  dont know the material spec or its thickness but you 
should be able to have them made far cheaper than the connector vendor is 
looking to soak you for them.
What qtys do you need?
BTW-  what does this "disk" do?
Lenny Carter
Design Engineer
ERG, Inc.
www.ergpower.com


----- Original Message ----- 
From: "Dorothy Lush" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, March 04, 2008 2:46 PM
Subject: Re: [TN] Circular Mil Connector Installation Problem...


I will bet that a local vendor can drill you those based on your cad
files of the PCB

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
Sent: Tuesday, March 04, 2008 11:37 AM
To: [log in to unmask]
Subject: [TN] Circular Mil Connector Installation Problem...

Hi All!

I've got some ladies in our slide operation wanting to take some of us
engineers out to be drawn and quartered because we're asking them to
install a mil connector into an assembly without alignment disks. If any
of you have worked with these connectors, you know what I'm talking
about.

Here's a picture of a connector with an alignment disk:

http://stevezeva.homestead.com/files/Disk_on_Connector.jpg

And here's the one that has the blood shooting out the eyes of the
ladies on our slide line:

http://stevezeva.homestead.com/files/Connector_without_Disk.jpg

These connectors did not come with alignment disks. As you can see,
they're from one of the few companies that make these connectors. So I
called them and asked them to quote me what it would cost for the
alignment disks for these connectors, and get this; $55.43 EACH (in
qty's of 50-999) with a 12-WEEK LEAD TIME! They do this because they
can...sheesh!

So, I'm wondering if any of you out there has a some trick or gizmo that
will aid in installing these connectors? By the way, the leads can't be
trimmed on a bias because the connector is stood off the board so high
that we just have lead protrusion...

Steve

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

Legal Disclaimer:
The information contained in this message may be privileged and 
confidential. It is intended to be read only by the individual or entity to 
whom it is addressed or by their designee. If the reader of this message is 
not the intended recipient, you are on notice that any distribution of this 
message, in any form, is strictly prohibited. If you have received this 
message in error, please immediately notify the sender and delete or destroy 
any copy of this message

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
for additional information, or contact Keach Sasamori at [log in to unmask] or 
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2