Subject: | |
From: | |
Reply To: | |
Date: | Sat, 8 Mar 2008 21:09:54 +0200 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
If you need another option you can try out US systems that can find surfaces
between organic materials.
There are big ones but maybe handheld (for paint thickness measurement) can
do the work
You can Try Deflesko
http://www.defelsko.com/
but I suppose it will be hard to get the resolution you want.
Cross sectioning did the work for us when we started working with LPI.
best
Ido Mashall
www.beyond-materials.com
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Louis Hart
Sent: Friday, March 07, 2008 5:25 PM
To: [log in to unmask]
Subject: [TN] LPI solder resist thickness
Technetters, I'm planning a designed experiment to find a way to control
dimensions of solder dams between surface mount pads. I am not sure of a
good way to measure dam dimensions, however. My concern is cross section may
smear the resist and make any microscopic measurements suspect.
I suspect looking at the resist on a PC board from the top would give a
width measurement, but I would like to measure thickness as well and see how
trapezoidal is the dam profile.
In the IPC test methods manual I did not find any recipe.
Thanks for any comments or guidance.
Louis Hart
Compunetics
Monroeville, PA USA
[log in to unmask]<mailto:[log in to unmask]>
412-858-1272
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.21.6/1316 - Release Date: 06/03/2008
18:58
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|