TECHNET Archives

February 2008

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Paul Greene <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Paul Greene <[log in to unmask]>
Date:
Wed, 27 Feb 2008 16:06:43 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (19 lines)
Some designs have the fingers coming to the theoretical edge of the PCB
with a chamfer required. In this case you should not see the buss bar
(stub) unless the edge alignment is off. Other designs have the fingers
stopping short of the edge with the buss bars running to the edge.
Depending on the chamfer, the design itself may result in a piece of the
buss bars being left. In either case, exposed copper will be seen and is
acceptable per IPC-A-600.
Paul Greene

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2