Thanks Dave!

 

You wouldn't believe how tight our get informed-compare-buy schedule is. To give you a hint: it can't wait until April :-)

 

Thanks for your feedback,

 

Ioan

 

________________________________

De : [log in to unmask] [mailto:[log in to unmask]] 
Envoyé : 15 février 2008 09:31
À : TechNet E-Mail Forum; Ioan Tempea
Cc : [log in to unmask]
Objet : Re: [TN] X-Ray equipment

 


Hi Ioan!  There is quite a bit of excellent X-ray equipment available on the market and a trip to IPC APEX would be one good way to evaluate multiple equipment vendors at one time! You need to decide just what capabilities you want in an X-ray system because the more capability, the greater the cost. We use Glenbrook Jewel Box 90 systems in our manufacturing facilities - good, rugged systems with good overall capability for voids, shorts, etc. and we use Fein Focus in our Failure Analysis laboratory - very high tech system for the necessities of failure analysis investigations. My recommendation is pull together a list of "must have" and "would like to have" system capabilities, match that to you budget and use the APEX opportunity to conduct your evaluations of the various X-ray system suppliers. Good luck. 

Dave Hillman 
Rockwell Collins 
[log in to unmask] 




Ioan Tempea <[log in to unmask]> 
Sent by: TechNet <[log in to unmask]> 

02/15/2008 07:53 AM 

Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to
Ioan Tempea <[log in to unmask]>

To

[log in to unmask] 

cc

 

Subject

[TN] X-Ray equipment

 

 

 




Dear Technos,



One more topic: what are your experiences with X-Ray equipment? Which
brand/model would you recommend or not advise?



We are a typical EMS and would like to inspect as accurately as possible
BGAs and leadless. So voids and hole-fill measuring capability is
desired. If possible, we would like to be able to localize an open BGA
joint.



Not exactly looking for big budget laminography machines like the 5DX,
but it should at least be 2D plus rotation capability. Or a regular, not
so loaded 3D system...



On-line and off-line answers welcome.



Thanks,



Ioan






---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------