Subject: | |
From: | |
Reply To: | |
Date: | Mon, 25 Feb 2008 08:15:37 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
So, this rotation is not the pad turning like a disk on the X-Y plane of the
board. Rather, it would be a rotation viewed from through a cross section on
the Z axis of the board with the PTH being the center of rotation.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Werner Engelmaier /*
Sent: Friday, February 22, 2008 5:01 PM
To: [log in to unmask]
Subject: Re: [TN] Inner Layer Separation / Land Rotation
Hi Kevin,
Above Tg the PCB resin becomes quasi-liquid, also still incompressible.
Thus,
it will not expand in the z-direction like a plug, but squish [is this a
technical term?] further out between PTHs while being held back by the PTHs,
which
are quite strong and expand rather less than the PCB
[CTE(PCB):CTE(Cu)=350:18
ppm/C]. Thus, there is much more movement at the pad periphery than where
the
pad is attached to the barrel. Result: land rotation that is big enough to
cause Cu plastic deformation and separation of the pad from the PCB resin as
the
resin returns to its initial volume on cooling.
Werner
**************
Ideas to please picky eaters. Watch video on AOL Living.
(http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-du
ffy/
2050827?NCID=aolcmp00300000002598)
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|