Sender: |
|
X-To: |
|
Date: |
Wed, 6 Feb 2008 15:35:54 -0600 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
quoted-printable |
In-Reply-To: |
|
Content-Type: |
text/plain; charset="US-ASCII" |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
From a connector reliability standpoint, SAC is mostly tin, and tin
oxidizes rather rapidly. So a SAC alloy wetting up onto the mating
portion of the connector contacts is still going to present the specter
of discontinuities and increased surface resistance, possibly even
sooner than a tin/lead solder will.
As far as I know, there is no difference in the acceptance criteria in
the standards for SAC alloy than for standard 63/37, assuming you are
required to meet the standards.
I don't know of any tin surface-to-gold surface issues, but I am always
open to being educated.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Werner Engelmaier /*
Sent: Wednesday, February 06, 2008 3:10 PM
To: [log in to unmask]
Subject: Re: [TN] SAC on gold pins
Hi Genny,
Well, that brings us to the famous "It depends."
It depends on which tin-to-gold issues you are referring to.
If you are talking about having solder on the mating surface, than I do
not think it makes much of any difference if it is SnPb or SAC.
Werner
**************
Biggest Grammy Award surprises of all time on AOL Music.
(http://music.aol.com/grammys/pictures/never-won-a-grammy?NCID=aolcmp003
000000025
48)
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|