TECHNET Archives

February 2008

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Mime-Version:
1.0
Sender:
X-To:
Date:
Wed, 27 Feb 2008 06:51:55 -0600
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, Brian Chandler <[log in to unmask]>
Subject:
Content-Transfer-Encoding:
quoted-printable
Content-Type:
text/plain; charset="windows-1252"
From:
Brian Chandler <[log in to unmask]>
Parts/Attachments:
text/plain (24 lines)
Amol,

We have a general guideline of the component weight must be < 0.81g/mm^2 
of soldered contect surface area. We also verify by running samples in the 
reflow oven with another part glued to the one that is soldered to the PCB. 
This to verify the surface tension can withstand 2X component weight as a 
minimum. 

Non-symmetrical parts must be verified with the 2X test above. 

Hope this helps.

Brian

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2