Subject: | |
From: | |
Reply To: | |
Date: | Mon, 7 Jan 2008 16:44:15 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Phillip
The technology I was eluding to was for a gold over nickel contact with the
solder sites covered with an OSP.
Best regards
Lee
J. Lee Parker, Ph.D.
JLP Consultants LLC
804 779 3389
----- Original Message -----
From: "Phillip Bavaro" <[log in to unmask]>
To: "TechNet E-Mail Forum" <[log in to unmask]>; "Lee parker" <[log in to unmask]>
Cc: <[log in to unmask]>
Sent: Monday, January 07, 2008 4:03 PM
Subject: Re: [TN] OSP w selective gold
> Is it true that eliminating the nickel step affects the wetting
> properties,
> and therefore selective gold is only used as a non-solderable conductive
> contact surface?
>
>
>
>
>
> At 07:06 PM 1/4/2008 -0500, Lee parker wrote:
> >Genny
> >
> >OSP/immersion gold (I assume you are alluding to immersion gold) boards
> >have
> >been fabricated in Asia for several years for the cellular phone handset
> >industry. The big issue I am aware of is in fabrication of the board; it
> >has
> >been necessary to use particular immersion gold processes, which your fab
> >has is probably aware of.
> >
> >Best regards
> >
> >Lee
> >
> >J. Lee Parker, Ph.D.
> >JLP Consultants LLC
> >804 779 3389
> >
> >
> >----- Original Message -----
> >From: "Genny Gibbard" <[log in to unmask]>
> >To: <[log in to unmask]>
> >Sent: Thursday, January 03, 2008 5:22 PM
> >Subject: [TN] OSP w selective gold
> >
> >
> >We have never used OSP for anything, but we may be required to switch
> >one of our products to it. Can anyone point me in the direction of some
> >good solid info regarding working with this finish?
> >How common is it, especially if you need selective gold? Are there any
> >solder process pitfalls to watch out for?
> >This is for leadfree products.
> >
> >Thanks in advance,
> >Genny.
> >
> >---------------------------------------------------
> >Technet Mail List provided as a service by IPC using LISTSERV 15.0
> >To unsubscribe, send a message to [log in to unmask] with following text in
> >the BODY (NOT the subject field): SIGNOFF Technet
> >To temporarily halt or (re-start) delivery of Technet send e-mail to
> >[log in to unmask]: SET Technet NOMAIL or (MAIL)
> >To receive ONE mailing per day of all the posts: send e-mail to
> >[log in to unmask]: SET Technet Digest
> >Search the archives of previous posts at:
> >http://listserv.ipc.org/archives
> >Please visit IPC web site
> >http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> >for additional information, or contact Keach Sasamori at [log in to unmask]
> >or
> >847-615-7100 ext.2815
> >-----------------------------------------------------
> >
> >---------------------------------------------------
> >Technet Mail List provided as a service by IPC using LISTSERV 15.0
> >To unsubscribe, send a message to [log in to unmask] with following text in
> >the BODY (NOT the subject field): SIGNOFF Technet
> >To temporarily halt or (re-start) delivery of Technet send e-mail to
> >[log in to unmask]: SET Technet NOMAIL or (MAIL)
> >To receive ONE mailing per day of all the posts: send e-mail to
> >[log in to unmask]: SET Technet Digest
> >Search the archives of previous posts at:
> >http://listserv.ipc.org/archives
> >Please visit IPC web site
> >http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> >for additional information, or contact Keach Sasamori at [log in to unmask]
> >or
> >847-615-7100 ext.2815
> >-----------------------------------------------------
>
>
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|