Subject: | |
From: | |
Reply To: | |
Date: | Wed, 19 Dec 2007 08:29:27 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
if ground plane sink additional heat in the PCB, you might have
insufficient reflow at particular location.... just a thought...jk
On Dec 18, 2007, at 10:24 PM, Werner Engelmaier /* wrote:
> Hi Tom,
> Maybe the pin location are not that random. With the exception of
> P16, they
> may all be at the outline of the die—I do not know your die size,
> but I am
> guessing. You did not give a thermal history; is it possible that
> you have
> creep-fatigue failures?
> 214.5 certainly should be sufficient for proper wetting of eutectic
> SnPb, if
> you have solderability.
> In order to find out, you need to sacrifice some of your product to
> cross-sectioning.
>
>
>
> Werner
>
>
>
> **************************************
> See AOL's top rated recipes
> (http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following
> text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail
> to [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/
> archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?
> Pageid=4.3.16 for additional information, or contact Keach Sasamori
> at [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|