TECHNET Archives

December 2007

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Dwight Mattix <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Dwight Mattix <[log in to unmask]>
Date:
Wed, 12 Dec 2007 12:00:18 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (62 lines)
At 04:24 AM 12/12/2007, Mark F. Focht wrote:
>I have a design that,due to space constraints, requires stacking microvias 
>(L1-
>L2) directly on top of (in line with) drilled buried vias (L2-L7, 
>L2-L11).  I am
>receiving conflicting information about this strategy being reliable (storage
>temp. range -50C to 110C, operating temp. range -40C to 85C) because of
>the different CTE's of the via fill material used in the L2-L7/L2-L11 vias 
>and
>the board material (FR406, 170Tg). While the board shops that will fab this
>admit they prefer the vias be staggered (not very pratical in this 
>design), they
>claim they have produced boards of this type without negative feedback or
>issues.  The CM that will be assembling this is extremely hesitant about 
>using
>this via strategy.  Does anyone have experience using a stack-up similar to
>this?  Is there a plugging paste material that very closely matches the 
>CTE of
>FR406, 170Tg?  Any and all comments are welcome.

Do a lot of it.  Regarding buried via fill, the best IST performance and 
solder shock survivability I've seen has come with the San Ei paste. 
Clearly superior to the MacuVia and Peters.  Taiyo is showing up now but 
jury still out -- incomplete test results. Had good luck in IST on lower 
aspect ratio 2+4+2 (1mm overall thick) qual w/ the Taiyo.


>Thanks,
>
>Mark Focht C.I.D.+
>Pole/Zero Corporation
>5530 Union Centre Dr.
>West Chester, Oh  45069-4821
>
>Voice:  513.870.9060 X173
>FAX:    513.870.9064
>Email:  [log in to unmask]
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 15.0
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to 
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to 
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
>for additional information, or contact Keach Sasamori at [log in to unmask] or 
>847-615-7100 ext.2815
>-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2