TECHNET Archives

November 2007

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Gervascio, Thomas" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Gervascio, Thomas
Date:
Fri, 2 Nov 2007 09:49:46 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (69 lines)
Curious what criteria are you using for BGA underfill (i.e. voiding,
coverage, etc). IPC-7095B section 7.2.2? 


 

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Joe Macko
Sent: Wednesday, October 31, 2007 7:34 PM
To: [log in to unmask]
Subject: [TN] verifying BGA underfill coverage

Fellow Techs

 

We purchased a GPD automated epoxy dispenser and I want to proof out the
new automated underfill application process on BGAs. We use a wickable
Loctite underfill that requires an elevated temperature to flow properly
under BGAs, etc..  Currently we successfully underfill by hand and want
to switch to an automated process using the GPD.  

 

I want to verify the underfill coverage under BGAs using a
non-destructive test method. The only non-destructive method I am aware
of is acoustic imaging using an instrument such as Sonoscan, which I
believe will show voids in the underfill material. I do not know how
industry non-destructively verifies underfill coverage.  I plan on
physically removing some BGAs on scrap boards to verify coverage but do
not want to do this on good boards for obvious reasons.

 

Question - What is the commonly accepted non-destructive method for
verifying BGA underfill coverage?  Look forward to your comment. thanks

 

Best Regards,

- Joe

 


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2