By the way,

I forgot to mention that it was necessary to insulate the solder pot
with glass wool blankets to maintain the 280dC.

Peer Langeveld



2007/11/28, Ioan Tempea <[log in to unmask]>:
> Dear Technos,
>
>
>
> I have moved to this new company and here we're running SN100C in wave,
> as opposed to the SAC305 I used to have before. So I have to start all
> over defining the baseline process parameters.
>
>
>
> Besides frequent shorts and solder not going all the way to the top, we
> have an issue with solder freezing at the corners of the solder pot. To
> overcome this "chilly" issue, we were suggested to run the pot at 540F!
>
>
>
> So I would like to know where you are with the SN100C:
>
> *          What pot temperature
>
> *          What conveyor speed range
>
> *          What flux (special formulation for the alloy or regular,
> solids content, water or alcohol based, etc)
>
> *          Nitrogen or not
>
> *          Other particular points of interest
>
>
>
> Of course an insight regarding the attainable defect free yields would
> also be appreciated.
>
>
>
> Thank you,
>
>
>
> Ioan
>
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
>

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------