Dwight,

You had to know you would get some of these requests now didn't you? :o)
Any chance of getting those photo's for my files?

Best Regards

John Parsons

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Dwight Mattix
Sent: Tuesday, November 20, 2007 11:11 AM
To: [log in to unmask]
Subject: Re: [TN] Laser drilling limitations

Well and simply put Lee. I concur.

Add to the bare pwb plating concern a concern about solder joint 
acceptability for uVia in pad.  As the uVia aspect ratio increases past 
0.5:1 the likelihood of voids in solder joints increases.

The shape/slope/quality of the uVia wall and quality of uVia plating 
becomes critical. It gets more difficult to maintain uVia form that assures 
solder quality.

Put another way, the solder joint becomes increasing sensitive to uVia 
shape and roughness. It becomes increasingly likely you'll have 
unacceptable solder voids due to outgassing from the uVia.

If it wasn't such a huge distribution I'd attach some photos to illustrate 
the effect.


dw


At 08:37 AM 11/20/2007, Lee parker wrote:
>Sherif
>
>The real issue with laser drilled holes is plating the via which is usually
>blind. Aspect ratios above 0.8 become a challenge which is even more
>impacted by the diameter of the hole. The hole you suggested has a aspect
>ratio of 1.0, the quality of the plating will be problematic.
>
>Best regards
>
>Lee
>
>J. Lee Parker, Ph.D.
>JLP Consultants LLC
>804 779 3389
>
>
>
>----- Original Message -----
>From: "Sherif Refaat" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Monday, November 19, 2007 10:18 AM
>Subject: [TN] Laser drilling limitations
>
>
> > Hi Technetters;
> >
> > What is a practical maximum via hole diameter and depth manufactured
using
> > Laser ablation? I would say these should be 0.006" and 0.006". Any
> > different
> > opinions?
> >
> > Sherif,
> >
> > ---------------------------------------------------
> > Technet Mail List provided as a service by IPC using LISTSERV 15.0
> > To unsubscribe, send a message to [log in to unmask] with following text
in
> > the BODY (NOT the subject field): SIGNOFF Technet
> > To temporarily halt or (re-start) delivery of Technet send e-mail to
> > [log in to unmask]: SET Technet NOMAIL or (MAIL)
> > To receive ONE mailing per day of all the posts: send e-mail to
> > [log in to unmask]: SET Technet Digest
> > Search the archives of previous posts at:
http://listserv.ipc.org/archives
> > Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> > for additional information, or contact Keach Sasamori at [log in to unmask]
or
> > 847-615-7100 ext.2815
> > -----------------------------------------------------
> >
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 15.0
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to 
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to 
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 
>for additional information, or contact Keach Sasamori at [log in to unmask] or 
>847-615-7100 ext.2815
>-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------