Hi Ioan!

We have three Mirtec MV-2HTL systems here and are very pleased with
them. Programming is very straight forward, and as with anything that
you program, the quality of the machines performance depends on the
quality of the program. It's just like pick and place machines, you
write a sloppy program, you'll get sloppy placements.

The price of the machines are pretty attractive when compared to others,
they can be had somewhere in the 60k US range or just a little over.

These machines are not solder inspectors, they look for part presence or
absence, polarity, part marking, and placement accuracy. They can see
some solder joints, but it's tough to get enough contrast for the
machine to see them reliably.

Steve Gregory

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Ioan Tempea
Sent: Monday, November 19, 2007 8:51 AM
To: [log in to unmask]
Subject: [TN] Tabletop AOI

Hi Technos,

 

We are currently looking for an AOI machine and I would like to get your
expert feedback on the latest available equipment: brands/models and
personal experience. We are mainly concerned with tabletops, but
feedback on in-lines is also appreciated.

 

Thanks,

 

Ioan

 


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------