Sorry, I forgot to mention, IPC provide us such lot of free standard and
you can get them by reach link as below:
http://www.ipc.org/ContentPage.aspx?PageID=4.1.0.1
Also, you can get the information of standard revision and development
as below:
http://www.ipc.org/Status.aspx
If you can go through this part, maybe some draft will be available for
your personal use. By the way, I hope that you can join in translation
and development of standard. Then you will find what a hard job to
create or translate the standard. And I am sure what you attitude of
self-learning will be successful with your job.
Best regards,
Andy Duan (Shi Hao)
------------------------------------------------------------------------
New Technologies Department
Beijing Siemens Cerberus Electronics Limited
2/F, RuiBao Building,
No.18,XinXi Road, ShangDi Information Industry Base,HaiDian District,
Beijing, 100085 China
Tel : +86 10 62962255 Ext. 602 (Office) or 126 (Lab)
Fax : +86 10 62987387
Internet : http://www.sbt.siemens.com
Intranet : http://intranet.bsce.sbt.siemens.com.cn
E-mail : [log in to unmask]
CAUTION: This message may contain privileged and confidential
information intended only for the use of the addressee named above. If
you are not the intended recipient of this message you are hereby
notified that any use, distribution or reproduction of this message is
prohibited. If you have received this message in error please notify the
sender of this message immediately. Due to safety reasons we can not
receive executable files (*.exe, *.vbs etc.) attached to e-mails any
more. These files will be deleted by our mail-system automatically. If
you want to send us these kinds of files please zip these files before
sending with winzip.exe.
-----Original Message-----
From: TGAsia [mailto:[log in to unmask]] On Behalf Of Wisdom Lu
Sent: Friday, November 16, 2007 12:58 PM
To: [log in to unmask]
Subject: [TGA] a new member self-introduction
Hi All
This is greeting from Wisdom Lu, a new member joined in this platform
for electronic industry.
I am working in Benchmark technology (Suzhou) company and work at EMS
industry about five years, I'm very appreciate you can share your
valuable ideas or suggestive opinion with me, thanks firstly,
Now I have a question need your help.
1. Who has IPC-4552 and IPC-4553 criteria? Would you please send me the
softcopy?
2. Did you know the advantage and inferior between Ni/Au and immersion
silver
for PCB surface treatment at PCBA assembly?
Expect your reply,
Thanks!
Wisdom
IMPORTANT NOTE: This e-mail and any attachment are confidential and may contain trade secrets and may also be legally privileged or otherwise protected from disclosure. If you have received it in error, you are herewith informed about its status. Please notify us immediately by reply e-mail and then delete this e-mail and any attachment from your system. You are prohibited from making use of or copying this e-mail or any attachment or disclosing the contents to any other person.
<Disclaimer in Chinese below, characters may not be displayed correctly.>
????:???????????,???????????????????????????,????????????,?????????????????????????????????????,???????????????????????????
|