Hello Bob
Wow, that's a small job!  Assuming you aren't done by now...  

Good place to start is IPC Handbook 830.  Then look at things like:

Volume - how many boards do you need to coat? - this will dictate
equipment selection.

Materials - what are you protecting it from? - how will you test your
material to ensure it will do what you think it needs to do?  What cure
limitations do you have (e.g. do you have to go with a UV cure to enable
you to meet the volume requirements?).

and the list could go on forever.  So - get a copy of 830 and let's
start from there...

 - Graham Collins
 L-3 communications, Electronic Systems

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Wilson, Bob
Sent: Friday, November 16, 2007 2:45 PM
To: [log in to unmask]
Subject: [TN] Conformal coating setup in-house

Happy Friday!

 

We'd like to set up a conformal coating system in-house (THEY want
to...I know it'll be a pain) and I'd like to ask the cognoscenti how to
go about this.

 

If you can point me in the right direction (documentation, vendors,
methods, pitfalls etc) I would greatly appreciate it.

 

Thanks!

 

Regards,

 

Bob Wilson

E/M Designer, CID+

SpectraSensors, Inc.

11027 Arrow Route

Rancho Cucamonga, CA 91730

(909) 948-4110

www.spectrasensors.com

www.ipc.org <http://www.ipc.org/> 

 

 


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------