Mornin' Gil,
Yeah, that sucked when they quit making it...I thought it worked really
well.
I tried quite a few tapes before I finally settled on one, 3M Scotch
233+.
It adheres well, and removes nicely without leaving residue. Even when
the assemblies are put in a 180 F. oven to speed the cure of the
coating. The coating also does not "pull away" from the tape once it's
sprayed like I see with many other tapes.
We spray UR, AR, and silicone coatings here and we use the masking tape
with all three. I'm attaching the datasheet for it...
Steve Gregory
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Zilber Gil
Sent: Thursday, October 18, 2007 4:22 AM
To: [log in to unmask]
Subject: [TN] Need a recommendation for masking tape for conformal
coating
Hello TechNet,
Until now we used the HT500 Humiseal masking tape for masking area
before conformal coating. Lately Humiseal announced that it will no
longer sell it. I need your recommendation for a replacement.
Thank you and best wishes,
Dr. Gil Zilber
Technologist, Elta system Ltd.
Tel. +972-8-8577240
Mobile +972-54-4983222
http://www.iai.co.il/site/en/iai.asp?pi=17887
The information contained in this communication is proprietary to
Israel Aerospace Industries Ltd.
and/or third parties, may contain classified or privileged information,
and is intended only for the use of the intended addressee thereof. If
you are not the intended addressee, please be aware that any use,
disclosure, distribution and/or copying of this communication is
strictly prohibited.
If you receive this communication in error, please notify the sender
immediately and delete it from your computer. Thank you.
This message is processed by the PrivaWall Email Security Server.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
