Subject: | |
From: | |
Reply To: | |
Date: | Wed, 10 Oct 2007 06:53:55 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Here you are in coat and tails and your mate is wearing a dust bag. A
long time ago I developed a process to spray coat polyurethane over the
PTHs prior to the installation of the compliant pins. I had total
control over process and design so it is still working today.
I have some concerns using AR CC, especially if the header is not
sealed. Success will not be the only intermittent thing here.
Dewey
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
Sent: Wednesday, October 10, 2007 6:40 AM
To: [log in to unmask]
Subject: [TN] Installing Press-fit Connectors AFTER Conformal Coating?
Good Morning All!
We're about to build some assemblies for a customer that wants us to
install press-fit connectors after conformal coating. BTW, it's going to
be an acrylic coating.
This is something new for me. Is this pretty common? Is there anything I
should be careful of when doing this?
Thanks!
Steve Gregory
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|