TECHNET Archives

September 2007

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Connector pin protrusion
From:
Phil Nutting <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Phil Nutting <[log in to unmask]>
Date:
Wed, 5 Sep 2007 12:17:46 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (23 lines) 
Good Afternoon,

In reviewing PTH connectors it looks like the standard pin length (for
the through board connection) is double the board thickness.  For an
0.062 board the pins are 0.120" long and for a 0.090 board the pins are
0.180" long.  We have some connectors that have 0.130" long pins that we
want to use in an 0.090" thick board.  I maintain this shorter pin will
be problematic to solder reliably.

Am I on the right track?

Phil

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2