Hi Paymon
Yes that is indeed the spec I refer to.
The timeframe for 004 revision I would expect around 2009
publication. Meantime, 2.6.3.7 is already available as is IEC 61189-5
5E01
Kindest regards,
Graham
[log in to unmask]
On 27 Sep 2007, at 22:27, Paymon Sani wrote:
> Hello Graham,
>
> Are you referring to the HP's electrochemical migration, EL-EN861-00
> test method? Do you know the time line for the overhaul?
>
> Thank you,
> Paymon
>
>
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Graham Naisbitt
> Sent: September 27, 2007 3:46 PM
> To: [log in to unmask]
> Subject: Re: [TN] IPC-SF-818, Class III and IPC-TM-650 2.6.3.3 Test
> Methods
>
> Paymon and Bev et al
>
> We are in the process of an overhaul of SIR in J-STD004 since the
> introduction of 2.6.3.7 in March 07.
>
> Also be aware that HP have instigated their own SIR tests we are all
> trying to take on board.
>
> Whatever tests you are being asked to perform, be very careful with
> the data retrieved.
>
> Kindest regards,
>
> Graham Naisbitt
> Co-Chair IPC SIR TG
>
> [log in to unmask]
>
>
>
> On 27 Sep 2007, at 16:10, Paymon Sani wrote:
>
>> Bev, this was expected since you are now a grandfather. Time is
>> taking
>> its normal course :)
>>
>> My wife and I had our first born 2 weeks ago but I am feeling sharper
>> than before!!!
>>
>> Regards,
>> Paymon
>>
>>
>>
>> -----Original Message-----
>> From: TechNet [mailto:[log in to unmask]] On Behalf Of Bev Christian
>> Sent: September 27, 2007 10:40 AM
>> To: [log in to unmask]
>> Subject: Re: [TN] IPC-SF-818, Class III and IPC-TM-650 2.6.3.3 Test
>> Methods
>>
>> Paymon,
>> Paymon,
>> I must not have taken my happy pill this AM. In Jack's absence, Tom
>> Newton has pointed out to me that I must not be awake this morning.
>> (He
>> was more diplomatic than that.) The version of 2.6.3.3 on the
>> webpage
>> (June 2004) is of course NEWER than the version in the old 818 doc
>> (Jan
>> 1995). I do not know what I was thinking.
>> Bev
>>
>> -----Original Message-----
>> From: TechNet [mailto:[log in to unmask]] On Behalf Of Paymon Sani
>> Sent: Thursday, September 27, 2007 9:41 AM
>> To: [log in to unmask]
>> Subject: Re: [TN] IPC-SF-818, Class III and IPC-TM-650 2.6.3.3 Test
>> Methods
>>
>> Hello Bev,
>>
>> Thank you for the speedy response, I verified it with our supplier
>> too.
>>
>>
>> Regards,
>> Paymon
>>
>> -----Original Message-----
>> From: TechNet [mailto:[log in to unmask]] On Behalf Of Bev Christian
>> Sent: September 27, 2007 8:38 AM
>> To: [log in to unmask]
>> Subject: Re: [TN] IPC-SF-818, Class III and IPC-TM-650 2.6.3.3 Test
>> Methods
>>
>> Paymon,
>> IPC-SF-818 is OLD! I had to go looking to find my dusty copy of it.
>> This is a dead document. In it at the back it has the IPC-TM-650
>> Test
>> Method 2.6.3.3 of March 1988. The NEW version, 2.6.3.3, rev B, which
>> you can download for free from the IPC webpage, is from, I presume,
>> June
>> 2004, since it says 06/04. I checked other test methods and they
>> show
>> the year as the second number.
>>
>> Interesting! If I go and look at my hard copy of ANSI/J-STD-004
>> (January 1995), at the back of it the copy of 2.6.3.3 is labelled as
>> Revision A, yet it has a date of January 1995, which is a newer date
>> than the Revision B on the IPC webpage.
>>
>> Jack!!!!!!!!!!!?
>> (Jack is at the IPC meetings this week. We will probably not hear
>> from
>> him until Monday.
>> Bev
>> RIM
>>
>> -----Original Message-----
>> From: TechNet [mailto:[log in to unmask]] On Behalf Of Paymon Sani
>> Sent: Wednesday, September 26, 2007 5:29 PM
>> To: [log in to unmask]
>> Subject: [TN] IPC-SF-818, Class III and IPC-TM-650 2.6.3.3 Test
>> Methods
>>
>> Does anyone know the difference between these 2 tests? Our flux
>> datasheet refers to the IPC-SF-818, Class III test method for the SIR
>> test result but it does not provide the resistance value! Does this
>> test
>> method supersede the standard SIR test method as per J-STD-004?
>>
>>
>>
>> Thank you in advance,
>>
>> Paymon
>>
>>
>>
>>
>> ---------------------------------------------------
>> Technet Mail List provided as a service by IPC using LISTSERV 15.0
>> To unsubscribe, send a message to [log in to unmask] with following
>> text
>> in
>> the BODY (NOT the subject field): SIGNOFF Technet
>> To temporarily halt or (re-start) delivery of Technet send e-mail to
>> [log in to unmask]: SET Technet NOMAIL or (MAIL)
>> To receive ONE mailing per day of all the posts: send e-mail to
>> [log in to unmask]: SET Technet Digest
>> Search the archives of previous posts at:
>> http://listserv.ipc.org/archives
>> Please visit IPC web site
>> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
>> information, or contact Keach Sasamori at [log in to unmask] or
>> 847-615-7100
>> ext.2815
>> -----------------------------------------------------
>>
>> ---------------------------------------------------------------------
>> This transmission (including any attachments) may contain
>> confidential
>> information, privileged material (including material protected by the
>> solicitor-client or other applicable privileges), or constitute
>> non-public information. Any use of this information by anyone other
>> than
>> the intended recipient is prohibited. If you have received this
>> transmission in error, please immediately reply to the sender and
>> delete
>> this information from your system. Use, dissemination,
>> distribution, or
>> reproduction of this transmission by unintended recipients is not
>> authorized and may be unlawful.
>>
>> ---------------------------------------------------
>> Technet Mail List provided as a service by IPC using LISTSERV 15.0
>> To unsubscribe, send a message to [log in to unmask] with following
>> text
>> in
>> the BODY (NOT the subject field): SIGNOFF Technet
>> To temporarily halt or (re-start) delivery of Technet send e-mail to
>> [log in to unmask]: SET Technet NOMAIL or (MAIL)
>> To receive ONE mailing per day of all the posts: send e-mail to
>> [log in to unmask]: SET Technet Digest
>> Search the archives of previous posts at:
>> http://listserv.ipc.org/archives
>> Please visit IPC web site
>> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
>> information, or contact Keach Sasamori at [log in to unmask] or
>> 847-615-7100
>> ext.2815
>> -----------------------------------------------------
>>
>> ---------------------------------------------------
>> Technet Mail List provided as a service by IPC using LISTSERV 15.0
>> To unsubscribe, send a message to [log in to unmask] with following
>> text
>> in
>> the BODY (NOT the subject field): SIGNOFF Technet
>> To temporarily halt or (re-start) delivery of Technet send e-mail to
>> [log in to unmask]: SET Technet NOMAIL or (MAIL)
>> To receive ONE mailing per day of all the posts: send e-mail to
>> [log in to unmask]: SET Technet Digest
>> Search the archives of previous posts at:
>> http://listserv.ipc.org/archives
>> Please visit IPC web site
>> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
>> information, or contact Keach Sasamori at [log in to unmask] or
>> 847-615-7100
>> ext.2815
>> -----------------------------------------------------
>>
>> ---------------------------------------------------------------------
>> This transmission (including any attachments) may contain
>> confidential
>> information, privileged material (including material protected by the
>> solicitor-client or other applicable privileges), or constitute
>> non-public information. Any use of this information by anyone other
>> than
>> the intended recipient is prohibited. If you have received this
>> transmission in error, please immediately reply to the sender and
>> delete
>> this information from your system. Use, dissemination,
>> distribution, or
>> reproduction of this transmission by unintended recipients is not
>> authorized and may be unlawful.
>>
>> ---------------------------------------------------
>> Technet Mail List provided as a service by IPC using LISTSERV 15.0
>> To unsubscribe, send a message to [log in to unmask] with following
>> text
>> in
>> the BODY (NOT the subject field): SIGNOFF Technet
>> To temporarily halt or (re-start) delivery of Technet send e-mail to
>> [log in to unmask]: SET Technet NOMAIL or (MAIL)
>> To receive ONE mailing per day of all the posts: send e-mail to
>> [log in to unmask]: SET Technet Digest
>> Search the archives of previous posts at:
>> http://listserv.ipc.org/archives
>> Please visit IPC web site
>> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
>> information, or contact Keach Sasamori at [log in to unmask] or
>> 847-615-7100
>> ext.2815
>> -----------------------------------------------------
>>
>> ---------------------------------------------------
>> Technet Mail List provided as a service by IPC using LISTSERV 15.0
>> To unsubscribe, send a message to [log in to unmask] with following
>> text in
>> the BODY (NOT the subject field): SIGNOFF Technet
>> To temporarily halt or (re-start) delivery of Technet send e-mail
>> to [log in to unmask]: SET Technet NOMAIL or (MAIL)
>> To receive ONE mailing per day of all the posts: send e-mail to
>> [log in to unmask]: SET Technet Digest
>> Search the archives of previous posts at: http://listserv.ipc.org/
>> archives
>> Please visit IPC web site http://www.ipc.org/contentpage.asp?
>> Pageid=4.3.16 for additional information, or contact Keach Sasamori
>> at [log in to unmask] or 847-615-7100 ext.2815
>> -----------------------------------------------------
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text
> in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
> http://listserv.ipc.org/archives
> Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
> information, or contact Keach Sasamori at [log in to unmask] or
> 847-615-7100
> ext.2815
> -----------------------------------------------------
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following
> text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail
> to [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/
> archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?
> Pageid=4.3.16 for additional information, or contact Keach Sasamori
> at [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
