Has anyone got a good "legal" definition of Dual-Use? Is it technology
or actual product?
-----Original Message-----
From: Genny Gibbard [mailto:[log in to unmask]]
Sent: Wednesday, September 12, 2007 11:19 AM
Subject: Re: Military Exemption from Lead-Free?
Military is not EXEMPT, it is OUT OF SCOPE. The directive does not
apply at all to military (other than the indirect massive impact the
directive has had). The directive has no legislative control over
military electronics.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Stadem, Richard D.
Sent: September 12, 2007 8:10 AM
To: [log in to unmask]
Subject: Re: [TN] Military Exemption from Lead-Free?
No specific alloy is "forbidden" in military electronics.
In general, solders and fluxes are categorized per and must comply with
J-STD-004, J-STD-005, and J-STD-006.
Specific solder alloy types are called out on assembly prints and BOMs
per MIL-STDs and Weapon Specs.
Military, traffic control, industrial safety, some medical, and many
other products are exempt per RoHS and IEEE exemptions.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Dave Dixon
Sent: Wednesday, September 12, 2007 8:33 AM
To: [log in to unmask]
Subject: Re: [TN] Military Exemption from Lead-Free?
Check out
Air Force's Airworthiness Advisory AA-05-01 It isn't very forceful in
the wording, but is the closest thing I could find so far to support my
cause. If anyone knows of any documentation forbidding lead free in
military products, I would sure appreciate a heads-up.
Thanks,
Dave
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of ekalgren
Sent: Tuesday, September 11, 2007 3:06 PM
To: [log in to unmask]
Subject: Military Exemption from Lead-Free?
I believe that I remember someone mentioning a military end-use
exemption from lead free requirements. Am I remembering correctly or is
this just wishful thinking? If it is true, can anyone point me in the
direction to get it in writing?
Thanks!
Eric Kalgren
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
NOTICE: This e-mail transmission (and/or the attachments accompanying it) may contain confidential or proprietary information belonging to DRS Technologies or the sender. The information is only for the use of the intended recipient. If you are not the intended recipient you are hereby notified that any disclosure, copying, distribution or the taking of any action in reliance on the contents of this information is strictly prohibited. Any unauthorized interception of this transmission is illegal under the law. If you have received this transmission in error, please promptly notify the sender by reply e-mail, and then destroy all copies of the transmission.
"This (document/presentation) may contain technical data as defined in the International Traffic In Arms Regulations (ITAR) 22 CFR 120.10. Export of this material is restricted by the Arms Export Control Act (22 U.S.C. 2751 et seq.) and may not be exported to foreign persons without prior written approval from the U.S. Department of State."
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
