Subject: | |
From: | |
Reply To: | |
Date: | Wed, 12 Sep 2007 18:23:39 +0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
What specific lead-free solder and pcb finish are you using?
--
Cheryl Johnson
(303) 485-8829 home
(303) 809-5815 cell
-------------- Original message ----------------------
From: "Thomas, Ian (Ian) %" <[log in to unmask]>
> Hi, Need some useful advice regarding a current design.
> I have a 12 layer FR4-370HR PCB, using stacked uvia's in pad which
> connect to planes on layers 2 & 3 which are flooded with no thermal
> relief.
>
> We have seen no issue's with leaded assembly, but on transferring over
> to un-lead, we are seeing solder issue's with the BGA's (0.5mm pitch) on
> assembly
> and also rework issuse's with 90% of the other components (including
> 0402's) in getting them off the board.
>
> Our first thoughts are to thermally relieve all the micro via's, but
> there are issue's because this may leave you with only one spoke on a
> pin in some areas.
>
> Has any seen these issue's before?
>
> Thank's in advance.
>
> Ian
> LSI Technology (Mobility)
>
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
> additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-615-7100 ext.2815
> -----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|