We need to put a small pcb inside silicone rubber that will be in contact
with body fluids and cleaning with water and alcohol.
We need it all to stand to FDA requirements.
We are looking for methods to close(encapsulation/enclosure.) the PCB before
casting it in the silicone piece for
1. Protecting it from the pressure and heat in the silicone casting,
about 160-180C for couple of minutes
2. Protecting it from the water that will pass the silicone which has
high permeability for water.
Any suggetions?
Thank
Ido Mashall
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------