Sender: |
|
X-To: |
|
Date: |
Wed, 12 Sep 2007 11:38:34 +0100 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
quoted-printable |
Content-Type: |
text/plain; charset="us-ascii" |
From: |
|
Parts/Attachments: |
|
|
Hi, Need some useful advice regarding a current design.
I have a 12 layer FR4-370HR PCB, using stacked uvia's in pad which
connect to planes on layers 2 & 3 which are flooded with no thermal
relief.
We have seen no issue's with leaded assembly, but on transferring over
to un-lead, we are seeing solder issue's with the BGA's (0.5mm pitch) on
assembly
and also rework issuse's with 90% of the other components (including
0402's) in getting them off the board.
Our first thoughts are to thermally relieve all the micro via's, but
there are issue's because this may leave you with only one spoke on a
pin in some areas.
Has any seen these issue's before?
Thank's in advance.
Ian
LSI Technology (Mobility)
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|