Kerry,
	IMHO that is an excellent question.  I know many engineers who
would never have thought of such a (possibly) simple and elegant
solution!  Have a great weekend,
Dave
 
>
>

Phil,
Dumb question, but can you put the resistor on the bottom of the board,
and live with it?
>
>

Let me start with, I know that we should not rely on the LPI solder mask
as an insulator.  So I need recommendations for a simple and cost
effective solution.

Problem parameters; 0.062 thick FR-4 with 2 oz copper and LPI mask.  PTH
components laying on traces that go under the parts.  PTH parts are
shorting to the traces.

Our fab house is against adding a second layer of LPI mask.  On face
value a second layer sounds good and easy, but I know there are issues
too long to list.

Short of raising the components above the board, applying an insulator
under the components or a new board layout is there a better way of
preventing this shorting problem?

Thanks in advance.

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------