Sender: |
|
X-To: |
|
Date: |
Tue, 28 Aug 2007 16:00:33 -0700 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
quoted-printable |
In-Reply-To: |
|
Content-Type: |
text/plain; charset="us-ascii" |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
So...
You want a .031 [1.2] substrate with .079 [2.0] of copper plating on the
secondary side... What is on the primary side? Is the ~11 oz plating
on the secondary side etched or just a solid copper surface?
Methinks there has to be more to this story :)
--
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice) * 503-627-5587 (fax)
http://www.tektronix.com http://www.pcb-designer.com
"Off-Grid and Proud of it!"
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Mark
Koitmaa
Sent: Monday, August 27, 2007 15:41
To: [log in to unmask]
Subject: [DC] Lamination to Copper Plate
Can anyone recommend a fab house that is able to laminate a 1-2mm thick
copper plate to the seconday side of a two layer Rogers RO4350B .031"
PCB?
Thanks in advance,
Mark Koitmaa
------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases
> E-mail Archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
------------------------------------------------------------------------
---------
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
|
|