I want one too. 

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Roland Jaquet
Sent: Wednesday, July 18, 2007 11:59 AM
To: [log in to unmask]
Subject: [TN] Post CAD / CAM software

Dear Technetters,

I solicit your advise regarding a CAM software (Post CAD) that would allow
to view PCB data in such a way that it would reliably show what PCB
manufacturer see. That would allow to run DRC status and output a
pre-production report on the general outlines, characteristics etc..
 
It would be a plus if it could show/generate the IPC-D-356A and show if
there is codes that need to be transformed into Flashes as for the 356.

Basically, a package that would be inexpensive and efficient to test CAD
data before releasing to the PCB manufacturer.

It doesn't need to allow modifications, as it should be done on the CAD.

Gerber 274X + ODD++ formats 

Meilleures Salutations
Very Best Regards
Roland
 
www.PCBspecialist.com
Roland Jaquet
14 Champ Budin
1258 Perly, GENEVA
SWTZERLAND
TEL+41-22-880-0405 GSM+41-79-203-3723 FAX +41-22-880-0409

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------