TECHNET Archives

June 2007

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Nila Young <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Nila Young <[log in to unmask]>
Date:
Thu, 14 Jun 2007 16:31:20 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (67 lines)
Werner,

The sample I have from our sister company does not have metal surrounded
by 2 pcbs. It is a real metal pcb that is intended to act as a heat sink
for the leds and is not surrounded by any FR-4. (Yep, a soldering
nightmare that I am sure plenty of assembly personel will be happy to
work on...) It is just a piece of aluminum that has a coating on one
side with traces laid on top of that followed by a soldermask. We will
not be putting the leds on ourselves, but will look for a cm to assemble
it. I believe that our sister company may have a CM that is hand
soldering the leds to the mcpcb. The only other part that goes on this
is a connector that will connect a FR-4 pcb to drive the leds. 

As for your White Paper, I have not read it as our pcbs are typically
all through hole and our engineers are just now in the process of
converting to RoHS compliance. 

Nila

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Werner Engelmaier
Sent: Thursday, June 14, 2007 4:18 PM
To: [log in to unmask]
Subject: Re: [TN] MCPCB finish questions

Hi Nila,
Your PCB sounds like a "challenge"-not to say nightmare in this brave
new LF-world of ours.
I sure hope you are planning on using vapor phase for your solder
assembly process, otherwise the thermal requirements are going to be
"hellish".
When you say 'metal core', do you mean a real metal-core substrate, or a
PCB 
with a heat sink   in the middle surrounded by 2 FR-4 PCBs?
What are you doing to make your PCB survive the LF-assembly process?
Did you read my White Paper on the subject?

Werner



**************************************
 See what's free at http://www.aol.com.

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2