Subject: | |
From: | |
Reply To: | |
Date: | Fri, 22 Jun 2007 11:20:37 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Joe,
have you considered applying solder mask or marking ink on the UL logo to
cover it? Of course this has to be discussed first with your customer.
Sherif Refaat,
----- Original Message -----
From: "Joe Hughes" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, June 22, 2007 9:37 AM
Subject: [TN] Vendor Markings
> I'm interested in opinions regarding Vendor Markings. If a fabrication
> drawing is silent regarding vendor markings, is it acceptable to apply the
> fabricators UL logo? We have a customer that is angry we applied our
> logo.
> However, we feel we need to apply our logo for our own traceability and
> ability to do failure analysis should the boards ever be in question.
>
> We have had several occasions where our customers return boards we didn't
> build. It obviously is easy when we can show them the logo is not ours,
> but
> it gets difficult when there are no logos on the board.
>
> They'd like us to rebuild 5 lots of boards due to not asking them if it
> was
> acceptable to apply our vendor id.
>
> Should the fabricator be responsible for requesting approval for vendor
> markings on every job, or should the board buyer be responsible for
> stating
> no vendor markings allowed?
>
> Your input is appreciated.
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> for additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-615-7100 ext.2815
> -----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|