Brian,
:)
You have been taking to many Dewey pills.
Bev
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Ellis
Sent: Wednesday, June 20, 2007 10:54 AM
To: [log in to unmask]
Subject: Re: [TN] Different Types of Ground NTC
If they were phased, they would certainly be fazed.
Brian
Bev Christian wrote:
> Speaking of "keep the various grounds apart and connected
> correctly" I once worked for a company (NOT Nortel, they know better)
> that when I insisted that we have ESD protection in the building, they
> hooked all the assemblers to the electrical outlets on the shop floor.
> Gulp.
> Bev
> RIM
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Hernefjord Ingemar
> Sent: Wednesday, June 20, 2007 2:32 AM
> To: [log in to unmask]
> Subject: Re: [TN] Different Types of Ground
>
> Wee is asking on good grounds and Donald's reply is excellent. I want
> add this, Wee:
> when you perform electrical tests, it's important to connect the
probes
> to the adequate ground or return, as some call it. Checking digital
> signals with probes on analogue ground (AGnd, AG) can give very
> misleading results, as well as doing analogue measurements connected
to
> digital ground (DGnd, DG), just to give example. As Donald explained,
> it's VERY important to keep the various grounds apart and connected
> correctly.
> Inge
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Donald Kyle
> Sent: den 19 juni 2007 14:36
> To: [log in to unmask]
> Subject: Re: [TN] Different Types of Ground
>
> Hello, Wee Mei
>
> In the broadest sense GROUND refers to the return wire or object or
path
> that is connected to a voltage source (clouds, batteries, power
> supplies, power lines).
>
> With regard to electronic equipment, the different types of grounds
are
> just names for different return paths to a power supply.
>
> For example, if a circuit board had an analog section and a digital
> section the circuit designer may have two or three different power
> supplies for each section.
>
> The digital power supplies most likely would have a common connection
> perhaps call DIGITAL GROUND and the analog sections would have a
common
> connection called ANALOG GROUND.
>
> Depending on the circuit design, these Grounds or return paths may be
> connected together at some point or not.
>
> In the case of lighting or static electricity (ESD), objects like you
> and me or a door knob or your favorite electronic device can become
the
> GROUND path to earth. In these cases the ground path through the
object
> would be considered an unwanted ground path.
>
> Chassis ground can refer to the metal box that electronic circuits are
> housed in or the frame of your car.
>
> If you are looking at AC power in your home for example, there are two
> types of ground. One is called the safety ground (green wire) and the
> other is called the neutral or ground (white wire). These two are
> connected together at the breaker box. The safety ground is connected
> to the metal chassis of the electrical device to protect you from
> unwanted electrical currents.
>
> I hope this helps.
>
> Donald Kyle
>
>
>
>
> At 03:25 AM 6/19/2007, you wrote:
>> Hello,
>>
>> Can someone share with me the different types of grounds : ESD
ground,
>> digital ground, analog ground, chassis ground, earth ground,
electrical
>
>> ground, anymore other types of grounds . . and their functions and
>> applications.
>>
>> Thanks in advance.
>> Wee Mei
>>
>> ---------------------------------------------------
>> Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
>> unsubscribe, send a message to [log in to unmask] with following text
in
>> the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
>> or (re-start) delivery of Technet send e-mail to
>> [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing
>> per day of all the posts: send e-mail to
>> [log in to unmask]: SET Technet Digest
>> Search the archives of previous posts at:
>> http://listserv.ipc.org/archives Please visit IPC web site
>> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
>> information, or contact Keach Sasamori at [log in to unmask] or
>> 847-615-7100 ext.2815
>> -----------------------------------------------------
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
> unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
or
> (re-start) delivery of Technet send e-mail to [log in to unmask]: SET
> Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
> posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
> archives of previous posts at: http://listserv.ipc.org/archives Please
> visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for
> additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-615-7100 ext.2815
> -----------------------------------------------------
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text
> in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
> http://listserv.ipc.org/archives
> Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
> information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100
> ext.2815
> -----------------------------------------------------
>
>
>
> ---------------------------------------------------------------------
> This transmission (including any attachments) may contain confidential
information, privileged material (including material protected by the
solicitor-client or other applicable privileges), or constitute
non-public information. Any use of this information by anyone other than
the intended recipient is prohibited. If you have received this
transmission in error, please immediately reply to the sender and delete
this information from your system. Use, dissemination, distribution, or
reproduction of this transmission by unintended recipients is not
authorized and may be unlawful.
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text
in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
http://listserv.ipc.org/archives
> Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
> -----------------------------------------------------
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential information, privileged material (including material protected by the solicitor-client or other applicable privileges), or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
